ZIRKON – 6610
Commercial-Web-Offset-Press for Heatset-Production
Manufacturer: „ZIRKON Druckmaschinen GmbH“
Type: „6610“ – Press-Number: 47083
originally made in 1988/92 – existing installation made in 1992
basically consisting of:
1 „M.E.G.”-automatic paster, Type: „DVZ“, for paper-reels with a max. diameter of 125 cm;
1 „ZIRKON“-infeed-unit with integrated „FIFE“-web-guides;
4 „ZIRKON“-blanket-to-blanket-printing-units for a max. web-width of 660 mm / cut-off of 452 mm
with alcohol-dampening-system similar to DAHLGREN,
incl. refrigerated TECHNOTRANS fountain-solution-circulator, Type: „FAC 10.000 TFk 10“,
with automatic „PressTech“-register-controls „Autocrat 250“;
1 „ZIRKON“-web-severer and web-catcher;
1 „M.E.G.“-hot-air-dryer „SIGMA plus“ approx. 5.500 mm length;
1 „ZIRKON”-chill-roll-unit with 3 chilling-cylinders incl. integrated „FIFE“-web-guides
including a chilled-water-station made by „TECHNOTRANS“ – capacity 73 kW;
1 „ZIRKON”-silicon-applicator for remoistening both sides of the web;
1 „ZIRKON”-folder angle-bars, longitudinal trimming of the web,
with air-floated folder-nose and „PressTech“-cut-off-controls „Webatron 300“,
folder prepared to fold half- and quarter-fold, double-parallel as well as 2×4 pages,
equipped with „ELTEX“-anti-static-equipment and „PLANATOL“-cross-glueing-device;
1 „BAUMÜLLER”main-drive-motor 114 kW
incl. operating-console and all necessary wiring-boards;
1 plate-puncher and plate-bender made by „ZIRKON“;
1 belt-conveyor-system incl. bump-turns and incl. 1 „ROTA-Schneider“-rotary-cutter;
1 „BALDWIN“-double-stream-counter „SOV 128“ incl. stream-diverter;
1 „ENVIROTEC“-thermical afterburner for 3.100 Ncbm – made in 2009 incl. heat-exchanger;
Total-Length: approx. 24 m respectively 30 m – Weight: 50 t
Production-speed (depending on paper and ink) approx. 40.000 pph (half-fold)
Despite of its age the press is in an excellent condition, technically as well as optically.
The press is still in production and can be seen printing until middle of June 2012.
Dismantling and re-installation can be done either by our own technicians or by technicians
from the press-manufacturer.
Numero de referencia: 0247
info@rotativpress.com
Precio: 60.000 Euro – EXW
