HEAT-SET – LITHOMAN IV – MAN ROLAND
Heatset-Web-Offset-Press – Manufacturer: M.A.N.-ROLAND
Type of Press: “LITHOMAN IV” – Serial-No. 4080…. – Year: 1999/2000
48 and 2×24 pages, pre-used, for the moment less than 50.000 production-hours
basically consisting of (from left to right):
1 “MEGTEC”-nonstop-paster type: “DLC”, max. reel-diameter 127 cm, max. 15,25 m/sec.
including reel-transport-system and semi-automatic-unpacking-equipment;
1 “M.A.N.”-webbing-in-equipment beginning at the paster, ending at the turner-bar-area;
1 “M.A.N.”-infeed- and tension-control-unit with integrated “E+L”-web-guides;
1 “GRAFOTEC”-web-severer between infeed-unit and 1. printing-unit;
4 “M.A.N.”-blanket-to-blanket-printing-units for 1.460 mm web-width and 2×620 mm cut-off,
all 4 units driven by one motor via connecting main-shaft,
with semi-automatic plate-changing-system “PPL”,
with “M.A.N.”-“HYDROMIX”-alcohol-dampening-system and refrigerated
“TECHNOTRANS”-circulator type: “FAZ-C 40000-W” incl. solution-pre-mixing-unit,
with “M.A.N.”-remote-controls for the ink-keys as well as for the registers
(circumference, lateral and diagonal) incl. “PECOM”-system,
with “M.A.N./TECHNOTRANS”-ink-level-system for all 4 printing-units in combination
with ink-consumption controls (however without ink-pumps),
with “PressTech”-register-control type “AUTOTRON 1400”;
with “OXY-DRY”-blanket-cleaning-device (brush-system) “RO KOMBI”;
1 “M.A.N.”-web-severer and -catcher between printing-unit 4 and dryer;
1 “MEGTEC” hot-air-dryer type: “DualDry III-135” – length approx. 13,5 meters;
1 “M.A.N.”-chill-roller-stand with 6 chromium-plated chilling-cylinders equipped with
“BALDWIN”-towel-cleaning-device incl. integrated “E+L”-web-guide for full web-width;
1 “SULZER-chilling-centre (without cooling-tower), to be used to control the temperature
of the ink-duct as well as the oscillating-rollers, too;
1 “WEKO”-silicon-applicator and remoistening system “WFG 1107 P2” for both sides of the web;
1 “ELTEX”-electrostatic-remoistening system;
1 “PressTech”-cut-off-register control-system “WEBATRON 3200”;
1 “M.A.N.”-folder (2:5:5.3) (moveable) folder-nose facing to the right,
with special-folder-substructure incl. cutting-and trimming-knives
including turner-bars, including 3 separate web-guides for 3 web-sections
including “PLANATOL”-fold-softening- and length-gluing-device “CombiJet 7 Com”
prepared for former-fold, 2. and 3. fold, double-parallel and Delta-fold
according to folder-data-sheet of M.A.N., especially prepared for:
1 x 48 pages A4 as well as 2 x 24 pages A4 or 1 x 24 pages A3 as well as 2 x 12 pages A3
including all necessary conveyor-belt-systems behind the folder-deliveries;
1 SIEMENS/M.A.N.-synchronized multi-motor-driving-system with
1 motor for the infeed-unit, 1 motor for the 4 printing-units, 1 motor for the chill-rollers,
1 motor for all driven rollers of the folder-substructure, 1 motor for the folder
1 set of control- and operating-consoles + all “SIEMENS”-electro-boards;
1 “M.A.N.”-electronic-concept “PECOM 1” plus additional step 2 and 3.
Numero de referencia: 0243
info@rotativpress.com
Precio: 400.000 Euro – EXW
Rotary-Trimmers, Compensating-Stackers and Automatic Palletizers for additional
price available, too.
There is also a LÜSCHER-CtP-System available from the former owner of the press.
